UNIT WOULD AGITATE BUT NOT SPIN

ApplianceGeneral Electric Washer

Model

Level of DifficultyReally easy

Time to do repair15 - 30 mins

Age of Appliance1 - 4 years

Tools Screw drivers
Socket set

ANDREW From LAUDERHILL, FL

May 28, 2008

21 out of 54 people found this instruction helpful

FIRST RELEASE PRESSURE CLIPS ON THE TOP FRONT TO RELEASE THE FRONT COVER.
(SLID SCREW DRIVER BETWEEN TOP AND AND FRONT COVER).
DISCONNECT CONNECTORS TO MOTOR.
REMOVE 4 NUTS WITH SOCKET SET.
INSTALL BELT ON MOTOR FIRST THEN WHILE HOLDING BELT TO FLYWHEEL WORK AROUND
TO INSTALL. NOTE: THE DRUM WILL NOT TAKE OFF RIGHT AWAY, IT WILL WAIT A SHORT WHILE
THEN START AND WILL INCREASE IN SPEED STEP BY STEP.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

USE GEH WH20X10058 (Now subbed to Motor and Inverter Assembly)

Part Number: PS2577719

$273.38
In Stock