All four of the cooktop switch controls needed replacing since none would control their respective burner.

ApplianceJenn-Air Range

ModelC228

Level of DifficultyReally easy

Time to do repair30 - 60 mins

Age of ApplianceMore than 10 years

Tools Wrench set
Pliers
Screw drivers

William From Williamsbirg, VA

May 20, 2008

4 out of 5 people found this instruction helpful

Turned off the power at the circuit breaker panel. Removed the control knobs from each switch and the four palnuts under each knob. Removed the two screws inside the vent well that hold the escutcheon in place. Pulled each switch up as much as possible to expose the wires attached underneath to each switch blade. Remoced each wire and replaced them on the new switch. Same procedure for all four switches. Reassembled in reverse order. Turned on power and all four burners lit up and were regulated as if new. I saved $244.00 doing the repair myself.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Surface Burner Infinite Control Switch (Now subbed to Infinite Switch)

Part Number: PS2201441

$44.50
In Stock