I really had two problems: the door latch broke and coincidently (?) the touch pad controls were erratic. The big help was from another repair story that suggested touching the "extra-rinse" button four consecutive times to activate a demo mode. All lights lit up so I figured the CPU was OK. Ther

ApplianceMaytag Dishwasher

ModelMDB7600AWW

Level of DifficultyEasy

Time to do repair15 - 30 mins

Age of Appliance5 - 10 years

Tools Pliers
Nutdriver
Socket set

david From Menlo Park, CA

May 17, 2008

2 out of 4 people found this instruction helpful

Very simple repair. First I removed all the screws on the inner door cover and then the screws holding the control panel to the door. I also had to remove the CPU to get it out of the way (two screws) to access the contact for the ribbon connector . When I pulled the contact for the ribbon conector away from the old panel, the small plastic sleeve holding it to its receptor came loose. I was worried I had ruined the receptor but it was a simple matter to insert the ribbon into the receptor and slide the sleeve over it to secure it. In a few minutes I put everything back together and Voila! Everything works like a charm. One estimate was $150 minimum to come out to the house, let alone the cost of the part. I saved myself a bundle, restored my male esteem and am anxious to have my next appliance break down so I can fix it.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

USE WPL 6-917716 (Now subbed to Control Panel - White)

Part Number: PS2340955

$158.27
In Stock