Tub wouldn't drain

ApplianceElectrolux Washer

ModelGLWS1339CS1

Level of DifficultyA Bit Difficult

Time to do repair30 - 60 mins

Age of Appliance1 - 4 years

Tools Pliers
Nutdriver
Screw drivers

Brian From Murfreesboro, TN

May 16, 2008

17 out of 22 people found this instruction helpful

First I removed the front panel,then set the timer to run. It began the drain,spin cycle, pump ran, but no water went out. Shop-vac the water out,removed hoses from pump,took out mounting screws from base, unplug pump plug. check hoses for debris since they're open, the impeller was broken. ordered the part . Mount the pump to the base, put the hoses on, plug in motor and replace front panel. plug into wall

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Drain Pump Assembly (Now subbed to Drain Pump - 60Hz 120v)

Part Number: PS7783938

$100.34
In Stock