12 year old washer stopped agitating during wash cycle.

ApplianceMaytag Washer


Level of DifficultyReally easy

Time to do repairLess than 15 mins

Age of ApplianceMore than 10 years

Tools Pliers
Screw drivers

Peter From Georgetown, TX

Aug 13, 2007

6 out of 7 people found this instruction helpful

First I removed the four screws on top of the front control panel, and removed the panel. I then pried out the decorative cap from the front of the cycle control knob, and removed the retainer clip on the knob shaft. I then removed the rest of the plastic knob assembly and spring, and removed the two screws holding the timer to the control panel. I disconnected the two cable connectors from the timer and removed the old timer. I reconnected the cables to the new timer, and reversed the above process to complete the installation.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Timer (Now subbed to Timer)

Part Number: PS2019463

In Stock