Stove would "beep" frequently showing a "F7" code.

ApplianceJenn-Air Range

ModelSVE47600W

Level of DifficultyEasy

Time to do repair30 - 60 mins

Age of ApplianceMore than 10 years

Tools Nutdriver
Screw drivers

Janice From Port Arthur, TX

May 14, 2008

8 out of 9 people found this instruction helpful

First disconnected electrical power to range.

Opened the oven door enabling access to bottom of touch pad (membrane panel) front. Removed 4 hex-head screws under membrane panel to free panel from range. Removed 4 surface control knobs then removed 4 surface burner infinite control switches with 4 star-point screw driver (8 screws; 2 per switch). Removed 2 hex-head screws holding clock control. Removed bottom edge strip from under the membrane panel (4 Phillips-head screw driver). Removed both left/right end caps from the membrane panel. Reattached all components in reverse order onto new membrane assembly. Reinstalled new membrane assembly to range.

Reconnected electrical power to range. Tested all components and range is working like new! Other than having an available person to assist in holding panel while reassembling this is pretty much a one-person job. Very common sense steps and relatively easy - even for this woman! Have been inspired to repair timer on dryer.

Actual repair took about 1 hour because I cleaned areas along the way that are normally non-accessible on a daily basis.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

USE WPL 71002116 (Now subbed to Control Panel With Touch Pad - Black)

Part Number: PS2077524

$254.55
In Stock