Replace table rotation motor

ApplianceKenmore Microwave

ModelSanyoOvertheRange

Level of DifficultyReally easy

Time to do repairLess than 15 mins

Age of Appliance5 - 10 years

Tools Screw drivers

Ed From Farmington, MN

May 14, 2008

3 out of 4 people found this instruction helpful

1) Important: Remove Power! (Leads to motor are live - you will get shocked)
1.5) Remove bottom cover (4 screws)
2) Slide spade terminals off motor (observe polarity / colors)
3) Remove 2 screws holding defective motor on
4) Affix metal sealing decal to mtor (prevents oil seepage)
5) Put circular spacer (small tube shaped cylinder) on new motor
6) Mount ne motor using two screws removed in #3
7) Attach Wires to motor
8) replace bottom cover (4 screws)

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Microwave Turntable Motor Kit (Now subbed to No Longer Available)

Part Number: PS2167231

No Longer Available