heating element brunt out after 25 years!!

ApplianceMaytag Dryer


Level of DifficultyReally easy

Time to do repair30 - 60 mins

Age of ApplianceMore than 10 years

Tools Nutdriver
Screw drivers

leroy From putnam, CT

May 05, 2008

5 out of 5 people found this instruction helpful

you must remove the element tube from from the dryer,{ mark all wires prior to },lay the unit on a bench,remove two screws-open the tube like a big book. then take a pencel and follow the element as it goes through the insulators. remove the two screws on both ends of the element & remove. to reinstall-reverse procedure-make sure to the element very snug-the instruction sheet is very good!!

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Lint Filter (Now subbed to Lint Filter)

Part Number: PS2035152

In Stock

Blower Wheel - with a hub clip (Now subbed to Blower Wheel with Clip)

Part Number: PS2200270

In Stock

Element Wire Kit (Now subbed to Heater Element - 240V)

Part Number: PS2200568

In Stock