The Shaft of the Auger Drive Motor Became Stripped

ApplianceJenn-Air Refrigerator

ModelJCD2389GE

Level of DifficultyReally easy

Time to do repairLess than 15 mins

Age of Appliance1 - 4 years

Tools Nutdriver
Screw drivers

Anthony From Amenia, ND

Apr 30, 2008

7 out of 11 people found this instruction helpful

I removed the one nut screw holding the Ice bucket shelf then removed the Ice Auger Container. Then I lifed the Part containing the Drive Motor. I removed the electrical connection which just plugs into the fridge. Once the Drive motor and container was out of the fridge I removed 4 screws and the Drive motor was out. I disconnected 3 electrical connectors and connected them to the new drive motor. Then replaced the motor and connected the 4 screws. I then installed the yolk on the drive shaft and then put the drive motor container back in the fridge and reconnected the electrical. Installed the nut screw and I was done.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Ice Bucket Auger Drive Motor Kit (Now subbed to Ice Bucket Auger Drive Motor Kit)

Part Number: PS2003313

$106.09
In Stock