when dispensing ice the flap door would not open properly and was open most of the time causing the door to ice up...cause solenoid was rusted badly

ApplianceGeneral Electric Freezer

Model

Level of DifficultyEasy

Time to do repairMore than 2 hours

Age of ApplianceMore than 10 years

Tools Nutdriver
Screw drivers

calvin From annapolis, MD

Apr 30, 2008

7 out of 12 people found this instruction helpful

I removed the screws for the inner door and removed inner lining. Then took out the ice dispenser in the door. Took off control panel on the front of the ice panel. Removed the rusted parts and put in new parts. Put all parts back the way it came apart. In retrospect.... I could have possibly replaced the parts from the front panel but by taking apart the door...I had to thaw out the inner panel and insulation with in the door.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Recess Door Spring

Part Number: PS285013

$3.02
In Stock

Dispenser Door Recess Crank

Part Number: PS291908

$3.32
In Stock

Dispenser Door Assembly or Flapper

Part Number: PS964304

$6.20
In Stock

Dispenser Door Solenoid Assembly

Part Number: PS1483583

$31.30
In Stock