No ice

ApplianceGeneral Electric Refrigerator


Level of DifficultyA Bit Difficult

Time to do repair30 - 60 mins

Age of Appliance1 - 4 years

Tools Nutdriver
Screw drivers

James From Solon, OH

Aug 01, 2007

78 out of 96 people found this instruction helpful

Removed the plate on the back of the refrigerator, removed the bolt holding the water valve in place (didn't know you could cut the water line to get it off), Plugged in the new water valve and water lines, 15 minutes, very easy to do.
Removing the ice maker was easy, 2 bolts and a plug. Loosen 2 bolts, lift the ice maker off, unplug it. Put the water chute and ice guard on the new one, put it back on the bolts, spend 1/2 hr getting the plug back in (couldn't see past my own hand), Tighten the bolts and you're done.
Really not difficult, except that the plug was angled, and I had to go by feel.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Dual Inlet Water Valve

Part Number: PS304374

In Stock

Front Dispenser Bucket Auger Nut

Part Number: PS652459

In Stock

Dispenser Crusher Cover

Part Number: PS964165

In Stock

USE GEH WR30X10093 (Now subbed to Ice Maker)

Part Number: PS1993870

In Stock