Water flow to ice maker quit & door switch wouldn't stop

Needed special "Torques" tool to remove front panel from refrigerator door not a problem, however, some folks may not have this type of tool. Replaced rubber actuator pad and DID NOT replace limit switch. Old pad was worn out & wouldn't reset. Replaced water outlet valve this fixed the water flow to the ice maker. Had to guess if this was the problem. I guessed right as the water flow to the door water point was working but the ice maker water flow was not. I also used a special tube cutter (I had one) to cut the water tubes to get a clean cut. Most of the time was spent on vacuuming the underside of the frig. Bottom line the ice maker works again!