A lot of water was coming out underneath the equipment.

ApplianceGeneral Electric Washer


Level of DifficultyEasy

Time to do repair15 - 30 mins

Age of ApplianceMore than 10 years

Tools Pliers
Screw drivers

Teresa From Miramar, FL

Mar 30, 2008

0 out of 1 people found this instruction helpful

1.- Open the front panel by pressing down (with a spatula) the 2 metal locks located between the front and top panels.
2.- Remove the drain hose located int the lower right and at the bottom using a set of pliers and a nutdriver.
3.-Install the new drain hose.
4.-Reinstall the front panel

The installation itself took me less tha 15 minutes.
Since I had opened the the front panel, I took rthe oportunity to air clean and dust off the equipment.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Drain Inlet Hose - seven and a half inches long (Now subbed to Pump to Tub Inlet Drain Hose)

Part Number: PS2322462

In Stock