no hot water supply to washer, selenoid pumping on and off

ApplianceGeneral Electric Washer


Level of DifficultyEasy

Time to do repair30 - 60 mins

Age of ApplianceMore than 10 years

Tools Nutdriver


Mar 28, 2008

4 out of 5 people found this instruction helpful

remove enough screws in rear panel to access water inlet valve. remove two screws holding water inlet valve to washer frame and flex valve outward enough to remove clamp on water inlet tube. wiggle inlet tube off of valve inlet nipple and back valve out enough to see wires. after noting wiring color codes remove the four wires from the old valve and discard old valve. install the new valve simply by reversing entire process. only difficult part of entire process is removing and reinstalling the inlet tube on the valve body as the tube is short and limits room to work.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Water Inlet Valve with Outlet Insert

Part Number: PS270305

In Stock