The original belt broke

ApplianceMaytag Dryer

Model

Level of DifficultyEasy

Time to do repair15 - 30 mins

Age of Appliance5 - 10 years

Tools Screw drivers

Mal From Pompano Beach, FL

Mar 27, 2008

0 out of 1 people found this instruction helpful

The repair was simple and a good diagram accompanied the belt. The best way to do this is to make sure the tensioner is in place with the spring attached on both ends. Replace the drum with the belt over it. Lay on the floor and with your left had grab the bottom of the belt, run it under the tensioner, then loop it over and onto the motor pulley. Hand rotate the drum to assure that all is lined up, swing up the front of the dryer, then pull the top down and snap it all together, start the dryer, grab a beer and watch your favorite sports program!

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Multi Rib Belt - 92" (Now subbed to Multi Rib Belt - 92-1/4")

Part Number: PS346995

$13.44
In Stock