Microwave would turn on and count down, but not heating and not rotate turntable. Pressing door up would occasionally start heat.

ApplianceGeneral Electric Microwave

ModelGESpacesaverMicrowave

Level of DifficultyReally easy

Time to do repairLess than 15 mins

Age of Appliance1 - 4 years

Tools Screw drivers

Michael From Ridgefield, CT

Mar 26, 2008

12 out of 18 people found this instruction helpful

First I disconnected the power and opened the door. Then I removed the top screws holding the top vent louvers, then removed the screw at the top of the touch pad. The touch pad removes by sliding up slightly then tilting top out. I unscrewed two screws holding the door latch assembly. Press the tab to remove and replace switch. Reconnect wires, reseat latch mount by placing top bracket tab in place first, allign and secure with screws. Reseat touch pad by placing bottom tabs in first, tilt forward and press up to seat top tabs, secure with top screw. Secure vent louver screws, plug in and watch your microwave work again.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

2-Terminal Micro-Switch

Part Number: PS236997

$26.89
In Stock