Frezzer & refrigerator not cold enough

ApplianceGeneral Electric Refrigerator


Level of DifficultyA Bit Difficult

Time to do repair1- 2 hours

Age of Appliance1 - 4 years

Tools Nutdriver
Screw drivers

ARNOLD From Simi Valley, CA

Jun 11, 2014

Review Part Selects diagram remove shelving & draw glides, ice maker & bin, back wall inspection plate/cover to expose evaporator fan. Separate modular plug to fan, remove fan bracket with fan attached, to work bench then remove fan blade from fan motor (just gently pull fan blade off motor's drive shaft), remove motor from bracket, install new motor,Fan Grommets, dust cap and re-install fan blade by gently pushing it onto the new motor shaft. Reverse install all part to original locations.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Light Bulb Kit - 60W

Part Number: PS219861

In Stock

Dust Cap

Part Number: PS284777

In Stock

Evaporator Fan Grommet - Red

Part Number: PS963756

In Stock

Evaporator Fan Motor - Motor ONLY

Part Number: PS2364950

On Order