NO DISPLAY & OVEN WOULDN'T HEAT

ApplianceJenn-Air Range

Model

Level of DifficultyReally easy

Time to do repairLess than 15 mins

Age of ApplianceMore than 10 years

Tools Nutdriver

CARROLL From ST. FRANCISVILLE, LA

Jul 29, 2007

10 out of 13 people found this instruction helpful

FIRST I REMOVED THE TWO SCREWS THAT HOLD THE BAKE ELEMENT. I THEN PULLED IT OUT FAR ENOUGH TO DISCONNECT THE TWO WIRES, AND REVERSED THE PROCESS TO CONNECT AND SECURE THE NEW ELEMENT. I THEN REMOVED THE SCREWS LOCATED UNDER THE CONTROL PANEL THAT HELD IT IN PLACE. I REMOVED THE WIRING, 3 CABLE CONNECTIONS, FROM THE CLOCK CIRCUIT BOARD, AND THE TWO SCREWS HOLDING IT IN PLACE. I INSTALLED THE NEW CIRCUIT BOARD, AND RECONNECTED THE WIRING, AND RETURNED THE CONTROL PANEL TO ITS PLACE.
THE WIFE WAS UPSET THAT SHE HAD OFFERED TO DO SOME OF MY CHORES WHILE I FIXED THE OVEN WHEN SHE FOUND THAT IT HAD ONLY TAKEN ME 10 MINUTES TO MAKE THE REPAIRS. THE PARTS WERE A PERFECT MATCH, AND THE JOB COULDN'T HAVE GONE ANY SMOOTHER.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

USE WPL 71001680 (Now subbed to Bake Element - 240V)

Part Number: PS2077288

$42.18
In Stock

Electronic Clock Assembly (Now subbed to Electronic Clock Control Board)

Part Number: PS2077361

$304.75
Recycling Rebate Available
In Stock