The Control Pad started loosing fuctions, one at a time until finally my stack unit would not even come on.

ApplianceMaytag Washer

Model

Level of DifficultyReally easy

Time to do repairLess than 15 mins

Age of ApplianceMore than 10 years

Tools Nutdriver

Maurice From Dallas, TX

Mar 25, 2008

16 out of 18 people found this instruction helpful

First I removed the control panel and board (which requires moving a total of 6 screws. I cleaned the board and touch padthem of the dust that had accumulated over the years and put them back to make sure that they needed to be replaced and when that didn't seem to help, I knew my options. The parts were $350.00 and although that might seem like alot.
I had watched a repairman do this 10 years earlier and saw how simple it was. To have the repairman do it, cost me over $600.00 last time.
He recommended that I replace the unit back then. This is one of the easiest repairs I've ever done. I 'd do it again, if I had to. At this rate maybe I'll get another 10 years out of my washer / dryer stack unit.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

USE WPL 306292 (Now subbed to Touchpad with Bracket)

Part Number: PS2029830

$166.13
In Stock

USE WPL 33001048 (Now subbed to Electronic Control Board)

Part Number: PS2035183

$266.31
In Stock