Install a new shelf

ApplianceKitchenAid Refrigerator

ModelKSSS42DA

Level of DifficultyA Bit Difficult

Time to do repairLess than 15 mins

Age of ApplianceMore than 10 years

Tools Screw drivers

Howard From Berkeley, CA

Jun 04, 2014

out of people found this instruction helpful

This was a little tricky because the part of the shelf that attaches into the door is much bigger than the slot. You have to be very careful that you do not break the insert tab. I first placed the bottom of the left support tab inside the slot of the door. I then used a flat screw driver and gently pried on the lower curved section until it was fully inserted inside the slot. I then repeated the same procedure on the right side. Then, I rotated the unit while at the same time pressing the upper tab inside the slot on the left. I repeated this on the right. With a little care and a lot of prayer, I was able to successfully insert the unit without breaking it. One note; the trim of the piece did not match the trim of my old one. However, the fit of the part is exact. I will be the only person in the house to notice the difference.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Door Shelf Trim

Part Number: PS321405

$60.00
In Stock