icemaker would not energize water solenoids, after it was replaced. icemaker had hung keeping water on. micro switch in fountain door had shorted out. I thought this may have ruined the control board.

ApplianceMaytag Refrigerator


Level of DifficultyEasy

Time to do repair15 - 30 mins

Age of Appliance5 - 10 years

Tools Nutdriver

W. J. From Linden, AL

Mar 24, 2008

2 out of 3 people found this instruction helpful

after replacing control board, the water for ice maker still did not work. Took solenoid asy. out and the two cils for ice maker side were open. could not move wires to fountain solenoids because the fountain outlet to front was 3/8 inch and every thing else was 1/4 inch, so i had to order the solenoid assy. which is for coils. They
have also changed the tubing connections on the solenoids from compression screw on to insert
type once you push tubing in, there is no way
to remove it. reminds me of old electrical insert
connections which is a rip off.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

USE WPL 61005274 (Now subbed to Dispenser Control Board)

Part Number: PS2060636

In Stock