BURNER SWITCH SHORTED OUT

ApplianceFrigidaire Range

ModelFEFL63HSD

Level of DifficultyReally easy

Time to do repairLess than 15 mins

Age of Appliance1 - 4 years

Tools Pliers
Screw drivers

Stan From Sun City, AZ

May 19, 2014

PULLED THE STOVE AWAY FROM THE WALL, DISCONNECTED THE POWER CABLE, REMOVED THE TOP PART OF THE BACK WHERE THE SWITCH WAS. IN FRONT THERE ARE TWO SCREWS THAT ARE PHILIP HEADS THAT HOLD THE THE SWITCH IN PLACE. BE CAREFUL WHEN REPLACING THE WIRES. WHEN YOU TAKE ONE WIRE OFF, PLACE IT ON THE NEW SWITCH IN THE THE SAME POSITION. THE SWITCH CAN BE PUT BACK, BUT BE CAREFUL OF THE ANGLE, BECAUSE IT HAS FOUR SCREW HOLES. REPLACE THE SWITCH, REPLACE THE BACK, PLUG THE POWER CABLE IN, AND PUSH THE STOVE BACK TO IT'S ORIGINAL POSITION. MAKE SURE THERE ISN'T ANYTHING ON THE BURNER WHEN YOU TEST THE SWITCH.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Infinite Burner Switch - 8" - 240V

Part Number: PS1145040

$21.41
In Stock