The lid switch sensor was inop

ApplianceKenmore Washer


Level of DifficultyEasy

Time to do repairLess than 15 mins

Age of Appliance5 - 10 years

Tools Screw drivers

Jeffrey From phoenix, AZ

May 10, 2014

Following another tip from this blog, I unscrewed the assembly and let it dangle. Then I used screw nuts to attach the wires. Big tip: Cut off the wires right next to the old assembly and use the smallest wire nuts you can find. It's a little tight, but can be done. The grounding wire is not a factor. Took me 10 minutes. Thank you partselect!

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Lid Switch Assembly

Part Number: PS350431

In Stock