Bottom baking element bit the big one

ApplianceGeneral Electric Range


Level of DifficultyEasy

Time to do repair30 - 60 mins

Age of ApplianceMore than 10 years

Tools Screw drivers

Jon From Apache Junction, AZ

May 06, 2014

First–removed the door. Very simple—lower the small latch on each hinge from the stove side DOWN to the door side to unlock. Second–crawled into the oven to reach the two screws holding on the bake element. Pulled out the element (wires are VERY short) to see if I had a screw-on or the push-on type. Third–went to PartSelect to order the correct element. Waited a few days for shipping to arrive. Fourth–just reversed the steps to install the new bake element. Fifth–installed the door and secured the locking latch back up to the oven side. Sixth–made me some HOT WINGS!

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Bake Element - Push On Terminals - 240V

Part Number: PS249285

In Stock