DRYER WILL NOT START

ApplianceWhirlpool Dryer

Model

Level of DifficultyEasy

Time to do repair15 - 30 mins

Age of Appliance5 - 10 years

Tools Nutdriver

James From Swannanoa, NC

May 06, 2014

1.Shut off power to dryer 2. remove back panel covers with 1/4" nut driver 3. use OHM meter to determine continuity at various thermal couples (3) and the one thermal fuse on the blower panel.. (this was the "bad "one in my case) 4. remove two wires and remove the one screw that holds fuse. did not have the model# for dryer, so I took the part# from the blown fuse and found it at PARTSELECT.COM.. they even showed an exact picture of the part I needed..ordered on Tuesday/arrived by FED X on Saturday...Reverse procedure to install..

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Thermal Fuse

Part Number: PS345113

$12.77
In Stock