Timer would stop advancing mid-cycle

ApplianceMaytag Washer and Dryer


Level of DifficultyEasy

Time to do repair15 - 30 mins

Age of Appliance5 - 10 years

Tools Nutdriver
Screw drivers

James From Tallahassee, FL

May 03, 2014

Remove 2 phillips on front access panel & remove panel. Remove 2 torx screws at bottom corners of control panel cover. Rotate bottom of panel toward you and pull down and toward you to disengage clips on top of panel. Remove timer knob by pulling off. Remove two phillips screws on adjacent to timer shaft. Move timer away from panel and disengage plug. Remove metal plate by removing one screw. Reverse procedure to install new timer.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability


Part Number: PS2020347

In Stock