Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Anthony V - April 4, 2018
Verified Purchase
Parts were fine.
Part was fine. So far so good.
★★★★★
★★★★★
Chris W - April 3, 2018
Verified Purchase
Fixed Leaking valve
Part was identical to original. Install was straight forward, but tubing wrenches were needed. Problem was solved.
★★★★★
★★★★★
Marsha N - February 22, 2018
Verified Purchase
Easy repair!
The part was in great condition and got here fast! Husband ended up installing because it came with great instructions, no need to call the repair man back. Works like a charm! Thank you!
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.0 / 5.0, 5 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
dripping water on refrigerator dispenser
put on new water valve, was very easy to do, but water is still dripping.Now, I must replace water feed line because I think the water pressure is too low and see if that helps.
Dean from Portage, WI
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water would not dispense and no Ice cubes
simply removed the old pump and replaced it with new oneconnecting water hoses (2 1 In & 1 out)and replugged the elactric connections as the old connections were plugged, Probably 1/2 hour including get ready and cleanup!
Lee from Whispering Pines, NC
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Wrench set
7 of 12 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
My fridg was leeking . . .
Called a repairman, was told it would cost $ 100.00 to walk across the carpet, to tell me what was wrong. Then cost of the labor pluss parts pluss - pluss !!!
Had the buildings handyman find the part - from the fridge- on Internet, he then installed, in 5 min. Walla !!!
Thank you Partselect. You made it all so e
... Read moreasy !!!
Lydia
Read less
Lydia from New York, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
5 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The ice and water features stopped working.
We used the frig for several years without the water turned on. I finally decided to look int the problem at the same time we replaced the door seal which was simple as well. I found that water did not get beyond the primary valve. My wife searched the part, found it to be affordable, we ordered it and put it in. Very simple. I used nut d
... Read morerivers carefully on the screws. I cut the end of the hose that attaches beyond the valve as it had a broken piece of the "Y" connector in it. I used a compression fitting from the old "Y" adapter to attach the hose to the new valve. Reattached the unit with the nut drivers and away it went!
Read less
Karen from Gilman, IA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers, Wrench set
5 of 11 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice maker and water don't work
turned water supply off, unhooked both set of valves, reinstalled them, tested operation. one valve on primary had to be capped also.
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Joanne
August 28, 2019
Purchased and replaced the primary valve which made water and ice work but the flow from water dispenser is very slow. Do I need to replace secondary valve to increase flow? I've already checked water pipe and it has good pressure. Already tried using with filter and on bypass both tests same result: Water flows but it's quite slow.
For model number ARS2667AS
Hi Joanne,
Thank you for your question. If the dispenser is dispensing water slowly, and you have checked the water pressure, the water filter and the primary valve, check to see if the water line in the door is frozen. If is unthaw it. Also check the dispenser control board to make sure it working correctly as well. You will need to test the board with a multimeter. Here is a link to one of our videos on YouTube that you may reference on how to use one, https://www.youtube.com/watch?v=bWC44fHn0As. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Ernie
January 5, 2022
Where to locate door water dispenser switch and what does it look like ?
Hello Ernie, thank you for your question. The Dispenser Micro Switch is PartSelect Number PS11738948. We have an installation video for you to access. We hope to hear from you soon.
