The Hub Under the Spinner basket broken/ Deteriorated

ApplianceGeneral Electric Washer


Level of DifficultyA Bit Difficult

Time to do repairMore than 2 hours

Age of Appliance5 - 10 years

Tools Pliers
Screw drivers
Socket set

Joe From Lucedale, MS

Mar 20, 2008

57 out of 76 people found this instruction helpful

Removed front cover, Control panel, top Cover, slasher unit, all very smiple stuff. the hub was broken and the spinner basket came right out. One half Hub attached to Spinner, Other half attached to Hub drive shaft. removing the Hub nut was the hard part. tried impack & socket, No luck. in removal. Had to usr Hammer & Chisel and bust Old Alum. Nut off. Clean up and replace parts. OK. Had to remove water pump and clear debree that went in pump when spinner Hub broke off . the spinner also bursted a crack in the outer poly tube when it cam apart.. Sanded the dmage area and Patched with a good coat of JB Weld. machine is working Like new. The parts all worked Great. the break down Chart was a great Help to get the right parts needed. Thanks

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Hub Nut

Part Number: PS271505

In Stock

Tub Bearing

Part Number: PS271509

In Stock

Hub Washer

Part Number: PS271511

In Stock

Inner Tub Base Hub

Part Number: PS273296

In Stock

Split Ring (Now subbed to Split Ring)

Part Number: PS1766022

In Stock

Tub Seal (Now subbed to Tub Seal)

Part Number: PS4704237

In Stock