Grinding noise from under machine during agitation

ApplianceMaytag Washer

ModelPAV2360AWW

Level of DifficultyReally easy

Time to do repair15 - 30 mins

Age of ApplianceMore than 10 years

Tools Pliers
Screw drivers
Socket set

John From Suffolk, VA

Apr 02, 2014

1. Turn water supply faucets to off. 2) disconnect hoses from washer and unplug from wall outlet. 3) take drain hose from discharge drain. 4) pull washer out and away fro wall, tilt with back of washer facing you. See belt and pulley wheels beneath. 5) turn pulley with hands, listen for screeching. Remove the belt. (6)remove access plate on the back of washer. See drain pump. Loosen the clamps on hoses and pull the hoses off the pump. 7) remove the three screws holding pump, lift pump out. Installation is reverse order of removal? Do not pry belt on, pull the brake pulley little and turn the drum pulley and it will slide on.. You do not want to bend or brake the pulley wheels.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Drive Belt

Part Number: PS2018741

$14.06
In Stock

Drain Pump with Pulley

Part Number: PS2347187

$44.48
In Stock