The deployment paddle (what the cup presses against) broke

ApplianceElectrolux Refrigerator


Level of DifficultyEasy

Time to do repair15 - 30 mins

Age of Appliance1 - 4 years

Tools Screw drivers

David From Mesa, AZ

Feb 23, 2014

(0) UNPLUG FROM ELECTRICAL POWER BEFORE ANY WORK IS PERFORMED. (1) Remove trim plate: Use fingernails to evenly pry up. It is only held in by plastic tabs, so be careful not to bend while removing the trim plate. (2) Remove touch module: Remove two black Phillips head screws, then release wire connectors on backside of control module, lift and remove module. Remove cup shield by removing Phillip head screws. (3) Remove water/ice dispensing module: Remove water filler tube from plastic clips (note: tube is installed with end slightly lower than module and there is a notch to the left side of module where the tube is routed and held in place behind module). Remove two Phillip head screws and remove module. ****INSTALL NEW MODULE AND ALL PARTS IN REVERSE ORDER****PLUG REFRIGERATOR IN TO ELECTRICAL SOURCE AFTER ALL PARTS ARE INSTALLED

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

SCREW-#8-18 X 1/2

Part Number: PS1525982

In Stock

Dispenser Module (Now subbed to Dispenser Module - 120V 60Hz)

Part Number: PS10060203

In Stock