Timer would not stay in "ON" position without pressure on knob.

ApplianceWhirlpool Washer / Dryer Combo


Level of DifficultyEasy

Time to do repair15 - 30 mins

Age of ApplianceMore than 10 years

Tools Nutdriver

Charles From Cornucopia, WI

Feb 15, 2014

1. Unplug washer/dryer unit from wall outlet. 2. Push washer control knob all the way in and turn counter-clockwise to remove. 3. Pull outer arrow ringout off of control knob shaft. 4. Remove (3) 5/16" retainer screws from top of control panel, then lift up and forward to hinge the control panel forward and down. 5. Squeeze the side tabs on the electrical harness plug and pull out of the timer assembly. 6. Remove the (2) 1/4" retainer screws from the face of the timer, under where the knobs were removed, and remove the old timer. 7. Insert the new timer into position and replace the (2) 1/4" retainer screws. 8. Plug the wireing harness back into the timer. 9. Rinstall the knobs. 10. Flip the control panel back into position and secure with the (3) 5/16" retainer screws. 11. Plug the Washer/Dryer back into the wall outlet. YOUR DONE!

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability


Part Number: PS871336

In Stock