Bake element shattered in half. Don't know why. Oven door screws were always loosing and needed to tightened 1-2 x per week

ApplianceFrigidaire Range

Model

Level of DifficultyEasy

Time to do repairLess than 15 mins

Age of Appliance5 - 10 years

Tools Nutdriver
Screw drivers

Timtohy From Hazle Twp, PA

Jan 23, 2014

Unplugged stove from outlet Used nut driver to loosen element. Gently pulled element from bake of oven wall and disconnected wire. Did same for other side. Lay new element on oven bottom reconnect both wires and gently push the element back into oven wall. Make sure insulation is not exposed. Tightened element. Second part was easier removed old screws with new ones. 2 minutes whole project took 15 minutes.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Handle Mounting Screw

Part Number: PS978302

$5.27
In Stock

Bake Element - Push On Terminals - 240V

Part Number: PS2332301

$23.86
In Stock