washer refilled after rinse

ApplianceMaytag Washer

Modelna

Level of DifficultyReally easy

Time to do repairLess than 15 mins

Age of Appliance1 - 4 years

Tools

joseph From ocala, FL

Jan 13, 2014

take putty knife.put knife under front right sider of control panel. push it in till it push clap and left side up. repeat the same on left side. this will let you till the whole control panel up and too the back.now take knob off by just pull straight off. now you take the sensor to the left off by turning left there are no screws. it will come right out. now just change the two wire. one large and one small. then take off the small hoses and put on the sensor. now. put the sensor. back by up in hole and turn to right, now put the control panel down and clip in bases. put knob on and your done.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Sensor Switch

Part Number: PS2367043

$81.63
In Stock