Ice maker stopped working

ApplianceKitchenAid Refrigerator


Level of DifficultyEasy

Time to do repair15 - 30 mins

Age of Appliance5 - 10 years

Tools Nutdriver
Screw drivers

Kevin From Fort Lauderdale, FL

Jan 09, 2014

After viewing the very clear video. Remove the ice maker door by first lifting the door and pressing in on the hinges. Remove the screw in the back lower right of ice maker with a one quarter inch nut driver and lift out the cover to expose the wiring harness. Pull the ice maker unit forward and out and reach behind it to pull out the wiring harness plug. The plug only comes out if you depress the small "push clip" in the center of the harness plug. Turn the old ice maker unit upside down and remove the three screws again with the one quarter inch nut driver to lift off the plastic cover. The wiring harness plug need to be pushed through the plastic housing to remove the plastic cover completely. Reinstall the plastic cover on the new ice maker. Reverse the procedure and install the new ice maker. This is really a simple repair if you watch the video.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Ice Maker Assembly - 8 Cube

Part Number: PS869316

In Stock