Water leaking onto the floor while washer was filling.

ApplianceMaytag Washer

ModelA5910

Level of DifficultyA Bit Difficult

Time to do repair30 - 60 mins

Age of ApplianceMore than 10 years

Tools Pliers
Nutdriver

Richard From Houston, TX

Mar 13, 2008

1 out of 3 people found this instruction helpful

By removing the front panel and raising the top panel, I was able to observe that water was overflowing from a small plastic "cup" that was positioned midway along the inlet lines for water entering the washer tub. None of the adjacent parts were visibly damaged or broken, but the rubber ones were soft and "gummy" to some degree. I ordered the three parts that I was able to identify, based on the photos at PartSelect.com. They arrived ahead of schedule and I was able to install them the same day. The only additional disassembly involved disconnecting the hot and cold water lines, removing the water inlet shield and gaining access to the upstream end of the old rubber hose in order to replace it with the new one.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Injector Hose (Now subbed to Injector Hose)

Part Number: PS2018686

$32.18
In Stock

Plastic Injector Nozzle (Now subbed to Plastic Injector Nozzle)

Part Number: PS2018687

$4.06
In Stock

Rubber Injector Valve (Now subbed to Rubber Injector Valve)

Part Number: PS2019175

$8.07
In Stock