No Heat From Dryer

ApplianceWhirlpool Dryer

ModelGEW9250PL0

Level of DifficultyA Bit Difficult

Time to do repair1- 2 hours

Age of Appliance5 - 10 years

Tools Nutdriver
Screw drivers

Henry From Round Lake, IL

Jan 04, 2014

Searched Internet for Dryer Model and problem, purchased the three items listed used in the heater element - long as I was replacing parts I was going to do them all...Unplug Dryer, Removed Back and Front Access panels using power driver with nut socket adapter... Lots of Dust Build Up in lower section of dryer, cleaned by hand, then vacuumed and the blew out with air from small compressor. Removed heater assembly and replaced All Three Electrical components, (Heater coil, High Limit, Thermal Fuse) Reinstalled heater unit and then closed up unit back panel and front panel. Plugged in, ran dryer front panel diagnostics - no errors reported, test dryer - dryer vent tube is now warm to the touch - the dryer working again.... (Suspected Bad Item: Thermal Fuse) Total repair time once parts in hand was about two hours, most time was spent cleaning out lint and dust to insure no fire hazard present

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

High Limit Thermostat and Thermal Fuse Kit

Part Number: PS334387

$31.37
In Stock

Heating Element - 240V 5200W

Part Number: PS344597

$57.07
In Stock

High Limit Thermostat - L295-50F

Part Number: PS345066

$38.16
In Stock