overfilling even on low, would not spin or fill for rinses

ApplianceGeneral Electric Washer

ModelWJSR1070A1WW

Level of DifficultyA Bit Difficult

Time to do repair1- 2 hours

Age of ApplianceMore than 10 years

Tools Pliers
Screw drivers

Rexford From Grafton, NH

Dec 31, 2013

out of people found this instruction helpful

installed water level pressure switch and hose easily but the symptoms were unchanged. Ordered and changed dual water inlet valve--also with no improvement. Checked belt and clutch operation and both were intact. Then I noticed that the reservoir on the outside of the drum on which the pressure hose attached seemed clogged. I used a wire to insert and open the clog. The washer now works like new. Recommendation: check for clogging in the semi-transparent reservoir before ordering a bunch of parts. Funny, this was never mentioned in the instruction videos.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Water Level Pressure Switch

Part Number: PS269790

$30.95
In Stock

Water Pressure Switch Hose

Part Number: PS272183

$5.98
In Stock