Pressure plates broken and facade insert torn

ApplianceMaytag Refrigerator


Level of DifficultyA Bit Difficult

Time to do repair15 - 30 mins

Age of Appliance5 - 10 years

Tools Nutdriver

David From Aurora, CO

Dec 18, 2013

Removed the façade at the two screws under the water tray insert, slowly removed the façade. Unplug the electrical connectors from the circuit board. I found it helpful not only to label the two that attach to the compression pad but also to mark the outside of the main connector. The most difficult part of the repair is removing the circuit board from the old façade and replacing it in the new one- the small spackle blade can help ease the clips back slightly and guide the board back into place on the new façade. Once the circuit board is in place, reconnect the electrical connectors and secure the façade. It is best to peel the insert partially and get it aligned before pulling the protective back all the way off and attaching

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Dispenser Facade Insert

Part Number: PS2068035

In Stock

Dispenser Facade

Part Number: PS2068101

In Stock