Touch pad broken through to micro switch on Normal Mode

ApplianceKitchenAid Dishwasher


Level of DifficultyReally easy

Time to do repair15 - 30 mins

Age of Appliance5 - 10 years

Tools Screw drivers

Roger From Alta Loma, CA

Dec 17, 2013

Unplug diswasher from under sink. Open door and remove most screws to separate inner and outer door section. I left the two lower in place and loose to allow door section separation. Circuit board and smaller board with micro switches snaps into place inside touch panel. Unsnap, removed old panel, insert new and snap circuit boards back into place. Be careful with ribbon harness. Replace all door screws with torx driver and plug in dishwasher. Real easy process. Good luck!

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Control Panel (Now subbed to Control Panel)

Part Number: PS11699799

In Stock