Ignitors kept clicking after flooding the stove, had to unplug any light manually

ApplianceGeneral Electric Cooktop

ModelJGP963SEK2SS

Level of DifficultyReally easy

Time to do repairLess than 15 mins

Age of Appliance1 - 4 years

Tools Screw drivers

John From King City, CA

Dec 16, 2013

We had flooded the stove from boiling and after that the ignitors kept firing. We had to unplug the unit and light manually. Not sure exactly what the problem was, but I replaced the module and harness. Very easy. 1. Unscrew hex nuts, you can buy a hex nut set anywhere. 2. Pull out ignitors. 3. Cut or peel away caulking, if you did this. 4. Carefully lift lid off and set aside. 5. Unscrew module and scree back on. 6. replace harness exactly as you find it. 7. Make sure all colors go back into module as originally set. 8. place lid back on and replace the ignitor. Really very easy. Thank you!

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Spark Module - (0+6)

Part Number: PS952865

$55.75
In Stock

Spark Igniter Switch and Harness Assembly

Part Number: PS953093

$31.18
In Stock