Washer would fill with water but not agitate, spin or drain.

ApplianceMaytag Washer

ModelA511

Level of DifficultyEasy

Time to do repair30 - 60 mins

Age of ApplianceMore than 10 years

Tools Screw drivers
Wrench set

Bob From Windsor, CA

Dec 12, 2013

Unplug the machine and disconnect the two water hoses. Use a short phillip screwdriver to remove two screws from the bottom front of the machine. Lift of the front panel to expose the motor. Lay the machine on its back on a 4 x 4 so the drain hose won't be damaged. If the screws appear rusted spary Kroil on them and let it soak for 45 - 60 mins. Remove the two belts. Remove the pulley via the set screw. Remove the four nuts to free the motor and slide plate. Undo all the wires. Remove the four nuts holding the slide plate. Install the new motor.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Drive Motor - One Speed - 120V

Part Number: PS2003768

$124.13
In Stock