Spotting agent was leaking from dispencer.

ApplianceKitchenAid Dishwasher


Level of DifficultyA Bit Difficult

Time to do repair30 - 60 mins

Age of Appliance5 - 10 years

Tools Nutdriver

Frank From Blue Springs, MO

Dec 09, 2013

The video did help with disassembly. But my dishwasher has the insulated door. So splitting the door was a bit of a challenge. I found both halves are glued. The inner door has the least glue about 2 inches wide by most of its length. I took wooden wedges on one side to open it to be able to see in and work. I separated the insulation with a flexible putty knife from inner door. Then repeated the process on the other side. I removed the doors halves once separated and the dispenser. I installed the new dispenser and plugged the unit in without outer door installed. Ran a rinse cycle to check for leaks. With none found unplugged and reassembled the door. Without any damage to the dishwasher stainless steel, plugged the unit back in and it is back in service. Be patient with the process.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Detergent and Rinse Aid Dispenser

Part Number: PS973797

In Stock