Burner switch (operated by the visible knob) sticks ON

ApplianceFrigidaire Range


Level of DifficultyEasy

Time to do repairLess than 15 mins

Age of Appliance1 - 4 years

Tools Screw drivers

Aaron From Logansport, IN

Mar 11, 2008

15 out of 21 people found this instruction helpful

FIRST, SHUT OFF the entire CIRCUIT for the range/oven at your breaker panel/fuse box, and verify it is OFF by testing the range/oven. Then...
1) remove range knobs, 2) use flathead screwdriver to unscrew plastic rings beneath knobs, 3) lift up face plate and disconnect oven light switch wires, 4) remove screws for metal plate that knob switches mount to, 5) tilt plate forward and replace each wire onto the new switch, one at a time, being certain to match the markings, 6) remove old switch, by taking out two screws, and put new switch in its place, 7) reassemble everything and your done.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Surface Burner Switch

Part Number: PS820763

In Stock