Bake Element was bad and Drip bowls needed replaced

ApplianceGeneral Electric Range


Level of DifficultyReally easy

Time to do repair15 - 30 mins

Age of ApplianceMore than 10 years

Tools Nutdriver

Randall From Lititz, PA

Mar 09, 2008

2 out of 3 people found this instruction helpful

First I turned the breaker off the Range. Second I removed the two screws that held the element inplace. Then I pulled element front until I could get to the two screw which connected the wires and removed then. Removed old Bake element. Installed new element by connecting the two wires and then pushed the element into place and secured it by reinstalling the two screws. Turned the breaker back on and tested. This is a very easy item to replace and takes very little time.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Trim Ring - 6"

Part Number: PS244475

In Stock

Trim Ring - 8"

Part Number: PS244479

In Stock

Drip Bowl - 6"

Part Number: PS244677

In Stock

Drip Bowl - 8"

Part Number: PS244680

In Stock

Bake Element - 240V 2300W

Part Number: PS249466

In Stock