Igniter would not light

ApplianceMaytag Dryer


Level of DifficultyReally easy

Time to do repairLess than 15 mins

Age of ApplianceMore than 10 years

Tools Nutdriver
Screw drivers

Jon From Salida, CO

Nov 09, 2013

Using a stubby phillips, remove the two screws from the bottom of the front panel. Remove panel by lifting out at the bottom, then up to unhook the two top tabs. Set to the side, be careful of the wiring to the door switch, no need to undo. Using a 1/4" nut driver or wrench, remove the screw attaching the igniter to the burner. Unplug the old igniter and plug in the new one. Be careful as the igniter is fragile and can break. Replace the retaining screw. Reattach the front panel, be careful to route the door wiring so it does not pinch. Replace the two bottom screws.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Flat Style Igniter

Part Number: PS373025

In Stock