Dryer Tub running out of round and squeaking badly

ApplianceMaytag Dryer

ModelMDE7500AYW

Level of DifficultyEasy

Time to do repairLess than 15 mins

Age of ApplianceMore than 10 years

Tools Nutdriver

Edward L From Sugar Grove, PA

Nov 03, 2013

Unplug the Dryer and remove the door by removing 2 screws on each hinge. Remove 2 additional screws on the opening side of the door. Set door aside. This loosens the front panel. Pull the panel toward you from the top and lift up to dis-engage the lower retainers. In the back, at the bottom of the drum and above the heating element you will see a drum support roller. Block the drum up so that it will not drop down while removing the snap ring using a pair of snap ring pliers. This allows you to remove the worn roller. Reverse procedure to assemble. Before assembly this is a good time to vacuum all lint from beneath the drum and heating element. Total time 15 to 20 minutes

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Water Inlet Valve with Thermistor

Part Number: PS2347919

$52.37
In Stock