control panel not working

ApplianceJenn-Air Dishwasher

Modeljdb2100aws

Level of DifficultyEasy

Time to do repair15 - 30 mins

Age of Appliance5 - 10 years

Tools Nutdriver

Thomas From Northampton, MA

Oct 29, 2013

1. Turn off the power at the panel (breaker). 2. Open the door and using the torx driver remove the 10 screws around the perimeter of the door. 3. Now you can loosen the interior panel.BE CAREFUL. THE EDGES OF THE PANEL ARE VERY SHARP! Do not remove the panel yet.4. Tilt the door back up until it is almost closed, then pull straight up on the door handle. At this point the front panel will slide up and off.5. Have a helper hold the interior panel while you disconnect the wires.6. Remove the white box from the control panel and unplug it. 7. Remove the control panel by removing the other screws. 8. Now you can begin to reassemble using the new control panel. To connect the tape from the panel to the white box, remove the screw that holds the white box together and take it apart. This makes plugging the tape in MUCH EASIER. 9. Reassemble. Have your helper there to hold the interior panel while you reassemble.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Control Panel Touchpad - Black

Part Number: PS2341063

$168.48
In Stock