Rubber on ice flapper had curled up

ApplianceGeneral Electric Refrigerator

ModelTFX25CRBEWW

Level of DifficultyEasy

Time to do repair30 - 60 mins

Age of ApplianceMore than 10 years

Tools Screw drivers

James From Hot Springs Village, AR

Oct 26, 2013

Remove front outside cover with the pictures on it. It is held in place with 5 push type pins. Remove the ice holder or turn off the power to keep the auger from running. Remove the four screws that hold the solenoid assembly and unplug the power plug. Remove the screw and small plate that holds the flapper assembly in place. Install the new flapper and spring and re-install the other parts. My flapper was loose in the holder causing the top of the flapper to hang on the hole in the ice outlet. I installed a small screw through the back of the holder to secure the flapper.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Ice Dispenser Door Spring

Part Number: PS299222

$9.50
In Stock

Dispenser Door Assembly or Flapper

Part Number: PS964304

$6.20
In Stock