Replaced drum rollers & front and back felt seal

ApplianceSpeed Queen Dryer

Model

Level of DifficultyEasy

Time to do repair1- 2 hours

Age of ApplianceMore than 10 years

Tools Nutdriver
Wrench(Adjustable)

Mary From Williamstown, NJ

Oct 25, 2013

Flipped the top as described in the video. Removed the front panels and disconnected the door switch wires. Removed the drum. Cleaned out any debris and lint. Removed the back panel. Removed the 2 drum rollers from the back panel. Used an emery cloth on the roller shaft. Cleaned off the dried adhesive from the front and back panels. Applied the high temp sealant on the back panel and installed the felt seal. Used acetone to clean up any sealant. Installed the new drum rollers and re-installed the back panel. Applied the sealant to the front panel and installed the new felt seal. Again used acetone to clean up any sealant. Installed the drum and installed the front panels and re-attached the door switch wires.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Cylinder Felt Seal

Part Number: PS2039485

$16.61
In Stock

High Temperature Adhesive - 2oz.

Part Number: PS2196040

$11.73
In Stock