Tub injector hose had hole in it from rubbing on side of cabinet.

ApplianceMaytag Washer

ModelA23CS

Level of DifficultyReally easy

Time to do repairLess than 15 mins

Age of ApplianceMore than 10 years

Tools Nutdriver
Screw drivers

Linn From El Segundo, CA

Mar 08, 2008

2 out of 3 people found this instruction helpful

Remove front panel of machine, 2 screws at
bottom. Remove 2 bolts at top front with nut
driver and whole top can be lifted to expose
all parts. Remove injector hose clamps and
clamp new hoses in place. I replaced both
injejctor hoses while open although only one
had small hole in it. This is the only repair
done on this coin-op machine in 20 years. At
this time I did replace both drive belts but they
could have run for more years, no cracks or
breaks in belts. This machine is in a 12 unit
apartment building. We have two on them,
same age. We purchased both coin ops new
in 1987.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Injector Hose (Now subbed to Injector Hose)

Part Number: PS2018686

$32.18
In Stock

Injector Tube Seal (Now subbed to Injector Tube Seal)

Part Number: PS2018973

$3.96
In Stock

Injector Tube (Now subbed to Injector Tube)

Part Number: PS2018975

$26.04
In Stock

Injector Fill Hose (Now subbed to Injector Fill Hose)

Part Number: PS2200019

$34.80
In Stock